YO!

How to reset Zebra printers to defaults, then assign an IP

Reset zebra printers to defaults

Disconnect zebra from PC.

Restart printer
 
 1.Press SETUP/EXIT
 2. Press PLUS (+) or MINUS (-) to display the options
 3.select LOAD DEFAULTS
 4. Press NEXT/SAVE to select the displayed choice.
 5. Press PLUS (+) or MINUS (-) to display the save options
 6. PERMANENT
 7. Press NEXT/SAVE
 8 . When the configuration and calibration sequence is done,
PRINTER READY displays.

  9. Restart the printer again and Print configuration labels.

 

Zebra 105 SL Network configuration:

 

1. Press SETUP/EXIT

2. Press < or > till IP Protocol is on display

3. Press check mark to select it

4. Use + - to find PERMANENT

 

5. Select Permanent

6. NEXT/SAVE PERMANENT

7. IP ADRESS 192.168.x.xxx

Subnet mask 255.255.255.0

Default Gateway 192.168.x.200

7. NEXT/SAVE PERMANENT

8.  Print configuration labels to check the added IP

 

Article Details

Article ID:
93
Category:
Date added:
2014-06-10 12:16:44
Rating (Votes):
(81)

Related articles